CarbonAccounting.ai
01 Journal

17 Nov 2026 · 7 min read · by the CarbonAccounting.ai team

Freight emissions tracking software for shippers that only have carrier invoices

The short answer: freight emissions tracking software comes in two kinds. Transport management systems and carrier dashboards calculate emissions per shipment from weight, distance and mode, and they work well for the loads that pass through them. Shippers without a TMS, or with freight spread across dozens of carriers, already hold the data in another place: carrier invoices in accounts payable. A ledger-first tool turns those invoices into Scope 3 freight emissions and upgrades the large lanes to tonne-km as load data arrives.

This article is for the controller, logistics manager or sustainability lead at a US manufacturer, distributor or retailer who has been asked for Scope 3 transport emissions by a customer, a lender, CDP or California SB 253, and is deciding what to buy. It compares the tool types honestly, works one example through with real factors, and lists what to ask a vendor.

Live demo · Scope Classifier

No signup needed

See your own spend classified to GHG Protocol scopes in about a minute.

01 Amazon Web Services Cloud infrastructure, annual S3 20,240 kg
02 Con Edison Electricity, 82,400 kWh metered S2 31,312 kg
03 Delta Air Lines Team offsite + client flights S3 24,375 kg

What freight emissions tracking software has to measure

Freight shows up twice in the GHG Protocol. Transport you pay for, inbound or outbound, is Scope 3 category 4, upstream transportation and distribution. Transport of your sold products that the customer pays for is category 9, downstream. Your own trucks are not Scope 3 at all: the diesel they burn is Scope 1. Getting that split right matters more than the decimal places, because the same shipment can land in three different places depending on who owns the truck and who pays the bill. All 15 categories are listed with examples on the Scope 3 categories page.

The calculation itself has two levels. The spend-based level multiplies dollars paid to carriers by an industry factor. It is fast and covers every invoice, but it moves with freight rates, so a cheaper contract looks like a cut in emissions. The activity-based level multiplies tonnes carried by kilometres travelled by a factor for the mode. That is what the ISO 14083 standard for transport chain emissions and the Smart Freight Centre's GLEC Framework describe, and it is what a customer asking about freight eventually expects for your biggest lanes.

Which freight emissions tracking software fits which shipper

The market splits by where the data lives. The table is based on how each type of product works, not on any single vendor's claims, so check details with the vendors you shortlist.

Freight emissions tracking tools by type
Tool typeData it usesBest forWhere it falls short
TMS emissions moduleShipment records in the TMS: weight, lane, mode, carrierShippers that tender most freight through one TMSMisses freight booked outside the TMS, parcel and supplier-arranged inbound
Carrier or forwarder dashboardThat carrier's or forwarder's own shipmentsOcean or air importers with one main forwarderOne provider's view; totals have to be stitched together across providers
Freight visibility platformTelematics and tracking feedsLarge road networks needing per-lane detailPriced for enterprise volumes; still not your full Scope 3
Ledger-first carbon accountingCarrier invoices in accounts payable, plus tonne-km where you have itShippers with many carriers and no TMS, who need the whole inventorySpend-based until load data is added for the large lanes

A shipper with one TMS that handles 90 percent of loads should use that TMS's emissions module for freight and a carbon accounting tool for the rest of Scope 3. A shipper with 40 carriers on invoices, a forwarder for imports and parcel accounts on the side has no single shipment system, and the only place all freight meets is the payables ledger. That is the case carbon accounting software built on the AP export handles without a new integration.

A worked example with real factors

The figures below illustrate the arithmetic for a mid-sized US manufacturer. They are not a customer result. The company pays about $4.1 million a year to 37 carriers and one ocean forwarder, across roughly 6,200 invoice lines. In the first pass every line is classified to category 4 or category 9 with a reason and calculated on spend. Then the three largest lanes, which carry most of the tonnage, are upgraded to tonne-km using load weights and distances from the bills of lading.

Activity-based freight emissions for the three largest lanes
LaneTonne-kmFactor (kg CO2e per tonne-km)Emissions
Outbound truckload, 18,000 t over 650 km average11,700,0000.107, DEFRA average HGVAbout 1,252 t CO2e
Ocean imports, 2,400 t over 9,000 km21,600,0000.016, DEFRA container shipAbout 346 t CO2e
Urgent air freight, 40 t over 8,000 km320,0000.602, DEFRA air freightAbout 193 t CO2e

Two lessons sit in those three rows. Ocean freight moved almost twice the tonne-km of trucking and produced a quarter of the emissions. And 40 tonnes of air freight, a rounding error in weight, produced more than half as much as the entire ocean program. A spend-based view hides both, because air and ocean are priced on very different curves. That is why the activity upgrade is worth doing for the large lanes and not worth doing for a $600 LTL invoice. The trade-off between the two methods is set out in spend-based vs activity-based emissions.

In CarbonAccounting.ai the tonne-km figure is entered against the invoice line it belongs to, the factor is applied in code rather than estimated, and the factor name and source print next to the posting. When a customer's supplier team asks how the 1,252 tonnes were built, the answer is the bill of lading, the invoice and the factor, all on one line.

How to start tracking freight emissions from carrier invoices

  1. Export twelve months of paid bills. Include vendor, GL account, memo and amount. Freight is usually spread across a freight-in account, a freight-out account and miscellaneous vendors.
  2. Classify every line. Category 4 for freight you pay, category 9 only where the customer pays and you choose to estimate it, and Scope 1 for fuel in your own fleet. Exclude fuel surcharges posted separately so the same load is not counted twice.
  3. Review the uncertain lines. Vendors such as "logistics services" can be a warehouse, a broker or a carrier. A person decides once and the decision is remembered next year.
  4. Upgrade the top lanes. Pull weight and distance for the carriers that make up most of the spend, and enter tonne-km. Carriers that take part in EPA SmartWay can often give you their own performance data.
  5. Report with a method note. State which lanes are activity-based and which are spend-based. Buyers and CDP accept a mixed inventory when the split is disclosed.

Spend-based screening for every freight invoice is on the Ledger plan at $2,340 a year. Tonne-km factors, supplier data requests to carriers and report packs are on the Compliance plan at $7,740 a year. Both are on the pricing page. Carriers and 3PLs, whose freight is their own Scope 1, have a separate page at carbon accounting for logistics, and contractors hauling sand and water in the oil patch are covered in carbon accounting software for oil and gas.

What to ask a freight emissions software vendor

  • Does it cover freight booked outside your TMS? Parcel, supplier-arranged inbound and spot loads are where tracked totals usually come up short.
  • Which factors does it use, and are they printed? A figure without a named factor source will not pass a customer's review.
  • Can spend and tonne-km sit in one inventory? You need both for at least the first year.
  • Does it keep the link to the invoice? Reconciliation with finance depends on it.
  • Does freight connect to the rest of Scope 3? A freight-only number answers one line of a supplier questionnaire, not the questionnaire. The full picture for suppliers is in carbon accounting software for suppliers.

Frequently asked questions

What is the best freight emissions tracking software for a shipper?

If one TMS handles nearly all loads, use its emissions module. If freight is spread across many carriers, forwarders and parcel accounts, use software that starts from carrier invoices in accounts payable, so every shipment is counted once, then upgrade the largest lanes to tonne-km with load data.

Are freight emissions Scope 3?

Freight you pay a carrier for is Scope 3 category 4, upstream transportation and distribution. Freight your customer pays for is category 9. Fuel burned in trucks you own or lease and operate is Scope 1, so a shipper with a private fleet reports freight in two scopes.

How are freight emissions calculated?

Multiply tonnes carried by kilometres travelled by a factor for the mode, for example 0.107 kg CO2e per tonne-km for an average diesel truck in the DEFRA set. Without load data, multiply freight spend by an industry factor and replace it with tonne-km for the largest lanes later.

To see your own carrier invoices classified, see how it works or compare the plans.

Written by the team building CarbonAccounting.ai, a carbon accounting product. Standards facts describe public frameworks. No customer stories or testimonials appear here, and competitor facts come from each vendor's own published material.

02 Keep reading

See your own footprint classified in about a minute.

Run the live demo on a sample or on your own spend lines, then create your account and start your inventory.