CarbonAccounting.ai
01 For oilfield services, midstream, fuel distribution and E&P finance teams

For oilfield services, midstream, fuel distribution and E&P finance teams

Carbon accounting software for oil and gas companies that need Scope 1, 2 and 3 from invoices

An oil and gas company carries two very different inventories. Facility methane, venting and flaring come from engineering calculations under EPA Subpart W. Everything you buy (diesel, power, rigs, chemicals, sand, trucking, contractors) comes from accounts payable. CarbonAccounting.ai builds the second one: upload the AP and fuel export, review the uncertain lines, and get Scope 1, 2 and 3 with a trail to every invoice. Plans start at $2,340 a year.

Live demo · Scope Classifier

No signup needed

See your own spend classified to GHG Protocol scopes in about a minute.

01 Amazon Web Services Cloud infrastructure, annual S3 20,240 kg
02 Con Edison Electricity, 82,400 kWh metered S2 31,312 kg
03 Delta Air Lines Team offsite + client flights S3 24,375 kg

This page is for the controller, ESG lead or HSE manager at a US oilfield services contractor, a midstream or gathering company, a fuel or propane distributor, or the finance team of an exploration and production company that has been asked for a carbon number. The request comes from an operator running a supplier program, from a lender or reserve-based lending syndicate, from a private equity owner, from a CDP request, or from California SB 253 if the group has more than $1 billion in revenue and does business in California. In each case the reader wants a figure that holds up when someone asks where it came from.

What carbon accounting software for oil and gas actually has to cover

Most sector tools are sold as one platform, but the work splits cleanly in two. The first half is source-level emissions at facilities: pneumatic controllers, tank venting, flaring, compressor leaks, completions. EPA requires those for facilities above 25,000 metric tons of CO2e a year under Subpart W of the Greenhouse Gas Reporting Program, and they are calculated from equipment counts, measurements and engineering equations. The second half is everything that passes through purchasing: fuel burned in your own fleet and rigs, purchased electricity, and every Scope 3 category that starts with a supplier invoice. That half is a ledger problem, not an engineering one, and it is where most of the line count lives.

We are explicit about the split because it decides what you should buy. CarbonAccounting.ai does not recompute Subpart W methane at equipment level. If your obligation is the federal filing for a gas processing plant, use the engineering workflow you already have for it. If your problem is that an operator, a lender or a disclosure rule wants your full Scope 1, 2 and 3, and nobody has classified twelve months of invoices, that is the job this software does.

Oil and gas emission sources and where the data sits
Scope and category Typical sources in oil and gas Where the data lives Handled here
Scope 1, combustion Diesel in rigs, frac fleets, trucks and generators; field gas and propane burned for heat Fuel invoices, fuel card feeds, bulk delivery tickets Yes, from quantity on the invoice
Scope 1, process and fugitive Venting, flaring, pneumatic devices, equipment leaks Subpart W calculations, LDAR surveys No, kept in your engineering workflow
Scope 2 Grid power for compression, pumping, yards and offices Utility bills with kWh Yes, location-based from kWh
Scope 3, category 1 and 2 Chemicals, proppant, tubulars, rentals, contractors, rigs and equipment Accounts payable by vendor and GL account Yes, spend-based with the reason per line
Scope 3, category 4 Trucking of water, sand and equipment; inbound freight Carrier and hauler invoices Yes, spend-based or tonne-km where you have it
Scope 3, category 6 Crew travel, flights, hotels, rental vehicles Expense reports, travel exports Yes
Scope 3, category 11 Combustion of the oil and gas a producer sells Production and sales volumes No, a volume calculation outside AP

For a producer, category 11 is usually the largest number in the whole inventory, and it comes from sold volumes times combustion factors, not from any invoice. For a service company, a midstream operator or a distributor, the purchased side is the inventory: fuel, power and the supply chain. The full list of categories with examples is on the 15 Scope 3 categories page.

A worked example for an oilfield services contractor

The figures below illustrate the arithmetic, not a customer result. Take a pressure pumping and well services contractor with $60 million of annual non-payroll spend, three yards in Texas and New Mexico, and a fleet that burned 1.2 million US gallons of diesel last year. The AP export has about 14,000 lines.

Illustrative inventory for an oilfield services contractor
Line Input from the invoices Factor applied Result
Fleet and equipment diesel (Scope 1) 1,200,000 US gallons 10.21 kg CO2e per gallon, EPA mobile combustion About 12,250 t CO2e
Yard and shop electricity (Scope 2) 4,500,000 kWh 0.371 kg per kWh, EPA eGRID US average About 1,670 t CO2e
Chemicals, proppant, parts and rentals (Scope 3, cat. 1 and 2) About 9,800 lines, $38 million Spend-based by vendor type Largest Scope 3 line, reviewed by vendor
Sand and water hauling (Scope 3, cat. 4) About 1,900 lines, $7 million Spend-based, or tonne-km where tickets show loads and miles Second-largest Scope 3 line
Rent, insurance, taxes, bank fees About 1,500 lines Excluded or mapped with a recorded reason No double counting
Unclear descriptions About 800 lines Sent to the reviewer Remembered for next year

Two things in that table are worth noticing. Scope 1 diesel is computed from the gallons on the fuel invoices, not from dollars, so a diesel price swing does not move the footprint. And the review queue is small: a person checks the 800 lines the classifier is unsure about, not all 14,000. Each decision is logged with the reviewer's name, so when an operator's supplier team asks why a $210,000 rental invoice carries the factor it does, the reason is on the line. The reviewer does not need to sit in the yard office either, since the work is a browser and an invoice image, and some contractors fill the seat with a part-time analyst hired from a board of remote job listings. The method behind the spend-based rows is set out in calculating Scope 3 emissions from spend.

Who asks oil and gas companies for emissions data

The requests that start most projects

01 Operator

Supplier emissions program

Large operators report Scope 3 and ask their contractors for Scope 1 and 2. A number traced to fuel invoices answers it. See supplier emissions reporting software.

02 Regulation

California SB 253

Groups over $1 billion in revenue doing business in California report Scope 1 and 2, then Scope 3. See California climate disclosure software.

03 Capital

Lender or private equity owner

Reserve-based lenders and fund owners ask for a baseline year and a method note before the next financing.

04 Disclosure

CDP or a customer questionnaire

Scores reward evidence and coverage. See CDP reporting software.

How it compares with oil and gas emissions platforms

Sector platforms built for operators centre on measurement: methane detection, OGMP 2.0 source and site reconciliation, Subpart W filing, flare and vent tracking. They are the right purchase for a producer with field methane obligations, and they are typically priced by quote. A ledger-first tool is the right purchase when the gap is the purchased side, or when the company has little or no facility methane at all, which describes most service companies and distributors.

Which kind of tool fits which oil and gas company
Company type Main emissions What to buy first
Upstream producer with Subpart W facilities Methane, flaring, category 11 A measurement platform for facilities, a ledger tool for the purchased side
Oilfield services contractor Diesel, purchased goods, hauling A ledger-first carbon accounting tool
Midstream gathering or pipeline company Compression power and fuel, some fugitive Both, sized to how many facilities cross the federal threshold
Fuel or propane distributor Delivery fleet diesel, purchased goods A ledger-first tool, plus category 11 from sales volumes if asked

What carbon accounting software for oil and gas costs here

The Ledger plan is $2,340 a year for one legal entity and covers Scope 1, 2 and spend-based Scope 3 screening from the AP export, with the column mapping saved for the next run. The Compliance plan is $7,740 a year and adds activity-based factors (gallons, kWh, tonne-km), supplier data requests, reduction targets with a frozen baseline, the audit log and report packs for SB 253, CSRD, CBAM and ISSB. A group with several operating companies uses the Assurance plan for consolidation. Every plan is on the pricing page, and how this compares with quote-based platforms is covered in carbon accounting software cost.

Mistakes that inflate or hide an oil and gas footprint

  1. 01 Diesel counted twice. Bulk deliveries to a yard tank and fuel card swipes at the pump can describe the same gallons twice if a fleet refuels from the tank. Count gallons where they are bought, once.
  2. 02 Fuel priced, not measured. A spend-based factor on a diesel invoice turns a price drop into an emissions cut that never happened. Use the gallons the invoice already shows.
  3. 03 Pass-through costs treated as purchases. Costs re-billed to an operator, such as third-party trucking, sit in your AP and in theirs. Keep a reason on each line so both sides can reconcile.
  4. 04 Leases and royalties classified as goods. Lease bonuses, royalties and severance taxes are payments, not emission sources, and belong in the excluded set with a recorded reason.

Related pages

Companies whose trucking is the main line should also read carbon accounting for logistics, and fabrication or equipment manufacturers serving the sector have their own page at carbon accounting for manufacturing. How the federal filing and the California law differ is explained in EPA GHG reporting vs SB 253, and the wider vendor field is in the best carbon accounting software. The step-by-step flow is on how it works.

01 What is the best carbon accounting software for oil and gas companies?
It depends on where the emissions are. Producers with Subpart W facilities need a measurement platform for methane and flaring. Service companies, midstream firms and distributors, whose footprint is fuel, power and purchased goods, are better served by ledger-first software that classifies AP invoices with a trail to each line.
02 Do oil and gas companies have to report Scope 3 emissions?
Under federal rules, no. California SB 253 requires Scope 3 from groups with over $1 billion in revenue doing business in the state, on a later timeline than Scope 1 and 2. Most smaller companies report Scope 3 because an operator, lender or CDP request asks for it.
03 Does CarbonAccounting.ai calculate Subpart W methane emissions?
No. Equipment-level methane, venting and flaring are engineering calculations that stay in the workflow built for the federal filing. CarbonAccounting.ai covers the purchased side: fuel and power from invoice quantities, and Scope 3 from accounts payable, with the reason and source line kept for every posting.
04 How is diesel converted into emissions?
Gallons from the fuel invoice are multiplied by a published factor. CarbonAccounting.ai uses the EPA mobile combustion factor of 10.21 kg CO2e per US gallon, prints the factor and its source next to the posting, and keeps the link to the invoice line it came from.
05 How long does the first oil and gas inventory take?
With a clean twelve-month AP and fuel export, the first classified screening is ready the same day you upload it. Review of uncertain lines typically takes a few working sessions, depending on how many vendors have vague descriptions. The column mapping and review decisions carry over to the next year.

See your own footprint classified in about a minute.

Run the live demo on a sample or on your own spend lines, then create your account and start your inventory.